Side Thrusters

05/07/09

This was the second one.  I didn't even attempt to unscrew it and just cut it off flush with the top.  Then with a screwdriver, I just carefully tapped out the remaining bits of the shaft.  As it wasn't all shredded and wrecked like the other, It came out in about five big chunks.  You can’t see it very well in the picture so I put a red arrow on which indicated the threads.

This was so much easier than the other one and only took about 10 minutes.  The previous one took over an hour of poking and scraping.

Submersible Build Log